Create an iCraft Watercolor Card

Are you familiar with our iCraft Adhesives?

Today Designer Erin Yamabe walks you through how to make your own unique card or even a canvas too with our iCraft Adhesive Sheets and Dots! Creating your own watercolor background is a snap with our iCraft adhesives!


Supply list:

iCraft Adhesive Dots – 1.5 inch
iCraft Adhesive Sheets
Mini Sticky Tape Runner
Zots – Medium

Other Supplies:

Heidi Swapp Color Shine
Ruby Rock-it card base
Sizzix heart diecut
Bazzill rubon sentiment
Bazzill bling
American Craft & Ranger glitter


Start by randomly adhering iCraft Adhesive dots to base of card.  Only remove backside of adhesive.


Leave the top of adhesive in tact, to act as a mask.


Spray your color shine liberally on card.  Wipe excess off.


Remove top layer of adhesive from iCraft Adhesive dots.  Sprinkle with glitter.


Adhere iCraft adhesive sheet to chipboard.  Run through favorite shaped die cut.


Remove top layer of adhesive, and sprinkle glitter on.


Adhere heart to card with mini sticky tape runner.


Adhere sentiment and bling with Zots – medium size.


Need some iCraft Adhesives for your next project? Shop right from the convenience of your computer through our online website! Pick up all your favorite iCraft products along with our Zots, HeatnBond and more!


Fall Home Decor | Zots & Glitter Dust

Hello Therm O Web fans, and Happy Fall!  Hope you are enjoying all the fun this season brings you!

Here’s a little project created for my front door, featuring our ZOTS and Glitter Dust!

This darling set of branches found at a local craft store was just perfect for what I had in mind!

The layers were so easy to put together with our foam squares and zots!  And the Glitter Dust is also a sealant, so it helps to keep it altogether with just one coat!

1.  Cut strip of 3×12″ paper for the banner.  Cut ends of banner.

2.  Double fold about 2 inches from each end, add foam squares between the folds.  Secure with foam squares to branches.

3.  Adhere embellishments onto banner.  For the Pumpkin, the Martha Stewart all around the page punch was used.  The Boo, Trick or Treat and Pumpkin were sprayed with Irridescent Glitter Dust.

Do you see the bits of glitter?  Love that it dries so quickly, too!

4.  Add green ribbon and wrap around from behind the branches, securing with foam squares.  Adhere Bakers Twine on top of the scalloped unfolded flower, and secure Glitter Dust spider with zot.

5.  For the rolled flowers, the supplies needed are:  patterned paper, favorite die cuts, quilling tool, Zots, and foam squares.

6.  When you roll the paper, roll towards the side you wish to show.

7.  The very bottom of the die cut will have a space to place the zot.  Then, simply push the rolled papers into the zot.  3D zots work best for dimensional work.

8.  Adhere the rolled flowers with zots, these were placed in bunches around the banner and just underneath.

9.  Cut and adhere some papers from behind the branches.

10.  Adhere flowers and spiders as desired, with zots.

Products used:

Foam squares

Glitter Dust

3D zots

MFT Stamps diecuts

Echo Park Chillingsworth Manor

Martha Stewart Pumpkin punch, spider stickers

May Arts ribbon

Prima flowers

Thanks for stopping by, and be sure to take advantage of the sale going now supporting such a GREAT cause!

Erin Yamabe

Mini Layered Flowers | ZOTS

Hello Therm O Web fans, hope you are doing well, and have had a great week!  It’s Erin here, and I think I’m finally recovered from Scrapfest!  Did you go?  There’s SO much energy at that event!

As you know, I love our ZOTS!  They come in bling, small, medium, large, and my favorite: 3D!

Today’s project will feature the small, medium, and bling!

In this banner, we will focus on the little layered flowers:

Ok, let’s get started, and here’s what you will need:

Some pretty paper, ZOTS: small, medium and bling, a foam pad, punch, and bling!

After punching out your flowers, you will start rolling each petal:

For one flower, you will have 4 pieces:

For each center, gently rub a tool down on the foam pad, to bring the petals up slightly.

After you add each of the 4 flower pieces together, with small ZOTS between layers, add your bling to the center.

And voila!

Simply ZOT dot them to any project!

Thanks for stopping by, have a great day ahead!

Erin Yamabe

Alpha Magnets: Repurposed!

Hello Therm O Web fans!

 Hope you are having a great week so far!  It’s Erin here today, and I have a fun way to jazz up your refrigerator or any magnetic board!

I took some old alphabet magnets from the girls’ puzzles, and created a little set for our fridge!

Here’s the materials I used, so let’s get started!

You will need:  ICraft Adhesive Sheets, Sticky Dot XL Runner, ICraft Adhesive Tape, paper scraps, glitter, a punch, and some alpha stickers.

First, cut your paper scraps to cover the fronts of the magnets.  I adhered them with the Sticky Dot XL Runner, or you can use your ICraft Adhesive Sheets.  For the edges, I used some ICraft Adhesive Tape and then placed some decorative tape over the adhesive.  I found with some of the tapes, you need to add your own adhesive.  And this ICraft stuff rocks!!!

Next, you will decorate the front of the magnets:

Grab your favorite punch, and you will need a set from your paper scraps, and a set from your ICraft Adhesive sheets.

Adhere the paper punch to your magnet, and then layer over the ICraft sheet piece.

Add your glitter over the ICraft Adhesive sheet punched piece, and voila!

Lastly, add your sentiment and you’re all set!

Thanks for stopping by, hope you have a great day ahead!

Erin Yamabe

We love our Teachers!

Hello Therm O Web friends!  It’s Erin here today, and in our household today was a new beginning!  The start of our oldest going back to school!  And she absolutely loves her school and everything about it!

Every year, we create little back to school “Survival Kits” for our beloved teachers!

She loves choosing the items and filling the goodie bags up!  And for the past few years, she has enjoyed helping to decorate them too!

For the paper strips, we added ICraft sheets behind them, then used a border punch on them.
And the rest were assembled with the Sticky Dot Runner XL and Zots!  And a few staples – she is extra cautious! LOL.
Thanks for stopping by!  Wishing you a great week ahead!


Hello and Happy Friday Therm O Web fans!  It’s Erin here with you today, with some wedding shares!  Over the past few years, our family has had many joyous occasions to celebrate!








Our daughters had the honor of being flower girls in all of them…

so love especially the rolled flowers as a reminder, and the 3D sots work perfectly for those!

Our ICraft sheets work amazingly well with die cuts, so I added a few doily ones in here…

Double page layouts are always a challenge for me, yet the sweet sentiments here in the chipboard and stickers were just perfect…so I paired them up with my favorite rolled flowers and ICraft sheet magic with die cuts!

Here’s our amazing products that I used here:

Sticky Dot Runner XL

3D Foam Squares

ICraft Dots

3D Zots

ICraft Adhesive

Thanks for stopping by!  Have a fabulous day ahead!

Erin Yamabe

I Craft Cards!

Hello there Therm O Web fans!  For those of you who attended CHA Summer, hope you all have traveled safely back home, and that you had a blast!

It’s Erin here today, with some cards for you…featuring our amazing ICraft products!

For the center of the flower, I simply wrapped the ribbon around itself, on one of our ICraft dots!  And for the ruler ribbon, I used the ICraft tape behind it:)

And in this card, the scalloped oval was adhered with the ICraft sheet, as I adhered the paper to the sheet, then punched it out together.  And for the double circles to the left of it, I used our ICraft tape along the seam:)

If you haven’t created with these fabulous products yet, there’s a SALE going on right now, so make sure to check them out!

ICraft Dots

ICraft Sheets

ICraft Tape

Thanks for stopping by, enjoy your weekend!

Erin Yamabe

From Sunrise To Sunset | ICraft & Glitter Dust

Happy Summer!  Hope you are all enjoying the ease and sweet tastes this season brings!

It’s Erin here, and today, I have a canvas to share with you:

Aside from all the paint and misting fun, naturally, I want to highlight the fabulous products used to keep this together and shining so nicely!

They also happen to be my very favorite go to products to date:

Sticky Dot Runner XL

ICraft Dots

Glitter Dust, Irridescent

Thanks for stopping by, and if you haven’t already tried these new products, NOW is a great time, since there’s a sale going on!

Have a beautiful day!

Erin Yamabe

Honoring Dad.

Hello to you, faithful Therm O Web fans!  In honor of Father’s Day, I would like to share a layout with you…

My husband is just the best Dad for our little ones, and am sure you all have amazing men in your lives too!  They do so much and we are so grateful for them!

Here’s a look at the awesome products used to make this layout happen:

ICraft Dots

Sticky Dot Runner


Foam Squares

Thanks for stopping by, and I hope you are having a wonderful easy breezy summer day!

Erin Yamabe

HELLO Summer! | ICraft sheets

Sweet, lazy, soft, and relaxed…Yes, Hello SUMMER!  I absolutely love this time of year, don’t you?  Hi Therm O Web fans, it’s Erin here with you today.

Every summer, our extended family goes up to the Lake altogether:)  Here’s a layout capturing some sweet summer fun!  And see the little transparencies?  The new ICraft sheets are perfect for those!

I placed the transparencies onto the ICraft sheet, and simply cut them out!

A great alternative for the smaller pieces would be our awesome ZOTS!

The small ZOTS were the perfect size behind the wood letters for the title:)

Here’s a list of the wonderful Therm O Web products used:

Sticky Dot Runner XL

ICraft Sheets


Thanks for stopping by, and I wish you the brightest of summer days ahead!

Erin Yamabe