Make Beautiful Pinterest Pretties with Therm O Web

af2b3acfbe346feb74fd91bde12ac44e

Pinterest Source

Hope you have been enjoying the beautiful inspiration Pinterest based projects!  I know I have!

While I do not have a green thumb, I absolutely LOVE flowers of all kinds!  This layout was based on these beautiful roses…paper, glitter dust, and zots style!

Pinterest.TOW.EYamabe.jpeg09

Here’s a closer look at the glitter dusted paper roses…and I’m loving our new Therm O Web Glitter Dust Photo Corners!

Pinterest.TOW.EYamabe.jpeg10

Here’s the supplies I used:

Pinterest.TOW.EYamabe.jpeg01

Therm O Web Supplies:

Zots – Small
Zots – Medium
Glitter Dust – Iridescent
Glitter Dust Photo Corners – Gold (COMING SOON!!)
Sticky Tape Runner

Other supplies:

Patterned paper – Crate Paper
Vellum – Ruby Rock-it Bella! Fundamentals
Flower punch – Marvy
Butterfly punch – Martha Stewart

Let’s create those paper roses!
Pinterest.TOW.EYamabe.jpeg02

You will need 4 punches of the flowers.  You can use any 5 petal flower punch or diecut.

Pinterest.TOW.EYamabe.jpeg03

On a soft surface, like a stamping mat, or mousepad, take the tip of an embossing tool, and gently press into the center of petal.

Pinterest.TOW.EYamabe.jpeg04

Next, curl the edge of each petal over a small tool, or pencil.  Repeat with 3 petals.

Pinterest.TOW.EYamabe.jpeg06

For the 4th petal, once you have pressed in the center of the petal, simply roll up the petals to create the center of the rose.

Pinterest.TOW.EYamabe.jpeg11

Adhere each flower layer with Zots.  Spray lightly with Glitter Dust.

Pinterest.TOW.EYamabe.jpeg07

And voila!  I’ve also added one paper rose to this quick card:)

Thanks for stopping by and making Therm O Web part of your creative day!

Erin Yamabe

Advertisements

Hop Along With our Spring Pillow Project

bunny close

This week is all about inspiration, and from one of our favorite places Pinterest.  Being that a pile of fabric strips were sitting at the end of the craft table, a quilted project seemed like a perfect way to go.  The search began and found a little inspiration though this photo.

9d9a474a79696662813b29af90ac8205(photo)

With strips of torn fabric, the basket weave effect came to be.  Once each strip was in place, using fusible fleece, the front woven panel was then ironed together and trimmed along each side.  The back panel of the pillow was then constructed from one solid piece of fabric and ironed on to fusible fleece as well.

000_0002

The bunny was cut from two piece of white fabric fused together using fusible web, light weight.  Found a bunny pattern on Pinterest here and cut out from fabric.  Added thread for the eye.  Used SpraynBond Fusible Adhesive Spray for the backside and ironed on to the pillow to keep in place as it was stitched to the pillow.  The pillow was then constructed, stuffed and completed with a stitched side and a pom-pom tail.

000_0005_00

Spring Bunny Pillow by Andrea Budjack

Supplies:
SprayNBond Fusible Adhesive Spray
HeatnBond Fusible Fleece
Fabrics
Pillow form or stuffing
Flower trims

Andrea


If you search Pinterest for altered composition books, there is tons of fabulous inspiration available. They make a nice, personalized and cheap gift!

rk tow nb6

Start with a plain composition book – many dollar stores carry them.

rk tow nb1

Using Therm O Web Super Stik, completely coat the cover of the book and the back side of patterned paper with adhesive. Coating the cover and the paper insures permanent sticking power.

rk tow nb2

Don’t cover the binding with patterned paper. Instead use some Therm O Web SuperTape Sheets and a wide ribbon or trim.

rk tow nb3

Cut strips of the Therm O Web SuperTape Sheets and completely cover the binding:

rk tow nb4

Peel off the red protective backing an apply ribbon and trim to fit. Once the cover and binding are done, decorate the cover with other embellishments. (Zots are perfect for adding buttons!)

rk tow nb 12

Next, to make tabbed pages, cover several pages with Therm O Web Memory Runner XL adhesive and cover with patterned paper here:

rk tow nb 9

and here:

rk tow nb 10

For a page with a seam, cover the seam with Sticky Lines:

rk tow nb5

and add a trim:

rk tow nb 11

And there you have it, a very inexpensive but super cute gift inspired by Pinterest!

Altered Composition Book by Rebecca Keppel

Supplies:

Sticky Lines
XL Tape Runner
Super Stik Glue Stick
Composition Book
Papers and Embellishments
🙂 Rebecca

Therm O Web Pinterest Inspired Shadowbox

We’re back with more Pinterest Inspired projects..and kicking off this week Designer Melissa Bullock with a special Shadowbox!

Shadowboxes are often overlooked not only as a special way to preserve keepsakes and also as a beautiful home decoration as well. This one will be treasured for many years to come!

Shadowbox 2013-02-22 037r

Pinterest Inspirations..

Original Pins: http://pinterest.com/pin/235876099205564403/ and http://pinterest.com/pin/235876099204026949/


Pinned Image

Therm O Web Supplies:

  • 1/2″ Super Tape
  • Jumbo Zots
  • 3D Foam Squares

Other Supplies:

  • shadowbox
  • photos/memorabilia
  • patterned paper
  • flower accents
  • die cut accents

Shadowbox 2013-02-22 006r

Shadowbox 2013-02-22 005r

It is important to use a strong adhesive when creating home décor.  Super Tape is a fantastic choice!  Use Super Tape in place of regular paper-to-paper adhesive for shadowboxes.

Shadowbox 2013-02-22 001r

Shadowbox 2013-02-22 002r

For non-paper memorabilia, like the silk flowers and ballet slippers, Jumbo Zots will provide a strong, lasting hold.

Shadowbox 2013-02-22 004r

Depth will add a lot of visual appeal in a shadowbox.  Use 3D Foam Squares to pop out die cut accents.

Shadowbox 2013-02-22 003r

shadowbox 2013-02-22 009r (2)

THANK YOU on speech bubble price labels

We’d like to say a very special THANK YOU to Designer Melissa Bullock! She’s been such a fantastic part of our team  with Therm O Web!

Today’s shadowbox marks her final project with us! We wish Melissa and her family all the best from all of us here at Therm O Web!

Happy Valentine’s Day from Therm O Web!

It’s Valentine’s Day!

The perfect day to show those your love just how much they mean to you! (although you can do this all year round!)

Designers Audrey Pettit and Rebecca Keppel have two projects that would be beautiful to have out any day of the year!

AudreyTOWNo.14Heart

AudreyTOWNo.14Heart2

No. 14 Heart Ornament by Audrey Pettit

Supplies:

Therm O Web Fabric Fuse Tape
Therm O Web Spray n’ Bond Fusible Adhesive
Therm O Web Zots Singles Large Clear Adhesive Dots
Stamps: Stampin’Up
Floss: DMC
Ink: SEI
Paint: Delta
Beaded Heart: Jolees
Other: Muslin Fabric, Lace, Button, Thread, Hemp, Polyfill Fiber

I love to make handmade home decor pieces for the holidays. These little pillow hearts are super fun to create and make a great little gift or accent in your home. And with a few time-saving tricks thanks to the help of Therm O Web’s line of fusible adhesives, you can make a lot of these cuties in very little time. Bonus!

AudreyTOWNo.14HeartTut1

To get started, hand cut or die cut three hearts from muslin fabric. They can be any size or shape you wish. My heart is about 3″ x 4″. If you are hand-cutting, make sure that all three of your hearts are identical. For mine, I free-hand cut my first heart, and then used it as a template for the additional two hearts.

Cut one of the fabric hearts randomly across into three separate pieces, as shown above. Now have fun embellishing the pieces with stamped images. I used some graphic number stamps and line border stamps. Using the cut edges as guides can help keep your stamping straight, or just go crazy. This is the messy, artsy part, so have FUN!

AudreyTOWNo.14HeartTut2

When you are done embellishing, turn your cut fabric pieces over and apply Therm O Web Fabric Fuse tape to the edges. Adhere lace trim.

Now take your second muslin heart and spray it with Therm O Web Spray n’ Bond Fusible Adhesive. Adhere your embellished cut pieces on top of the second heart to create one whole heart. Using Therm O Web’s fusible adhesives completely eliminates the need to pin each piece, which is a great time-saving tip!

Continue to embellish with hand-stitching along the “seams”. Dry brush white paint over the heart and stitch a large button to the top corner. Using a Large Zots Singles Clear Adhesive Dot, apply a beaded heart charm to the center of the button.

AudreyTOWNo.14Heart3

Lay finished heart onto the third and last heart cut out. Machine stitch around the edges, leaving enough of an opening to fill with Polyfill stuffing before stitching all the way closed. I left my thread ends long for a different decorative touch. Tie a simple loop hanger out of hemp string and stitch to the top of the heart.


After the let down of taking down Christmas decorations, it is nice to have a reason to decorate again–enter Valentine’s Day decor! Making a pretty altered frame for Valentine’s Day is easy with Therm O Web adhesives.

rk TOW valentine7

Love Frame by Rebecca Keppel

Supplies:

Therm O Web Memory Runner
Therm O Web iCraft Sheets
Frame
Patterned Papers

Start with an empty frame, some fun patterned paper a Therm O Web Memory Runner and Therm O Web i Craft Sheets.

rk TOW valentine1

Cover the frame backing with patterned paper. Cut out a heart shape from the iCraft adhesive using a Cameo or other die cut machine.

rk TOW valentine2

Peel one side of the iCraft sheet off and adhere heart to the paper covered frame back. Remove the protective top of the iCraft sheet and adhere buttons in the heart pattern. Once the heart is full of buttons, pour fine glitter over the entire area to fill small cracks that are too tiny to insert buttons into.

rk TOW valentine3

Using an iCraft dot and tulle, make a rolled flower by twisting and adhering the tulle onto the iCraft dot. Spray lightly with Therm O Web Glitter Dust.

rk TOW valentine5

Peel off the protective backing and adhere to the frame. A light spray of Glitter Dust adds a slight glittery touch and the adhesive included in the Glitter Dust helps keep the flower’s shape.

rk TOW valentine6

The die cut iCraft sheets make this project quicker and easier than ever!

rk TOW valentine8

Happy Valentine’s Day!

♥ Rebecca

 

Don’t forget…today is the final day to take advantage of our Red and Pink Valentine Sale! Visit our Therm O Web website to shop!!

Valentine-sale

Send Your Love in Style with Therm O Web!

February is the month of love and creating projects to celebrate this holiday!

We all need a keepsake box for those special Love Letters and Valentines.  This project is so easy and fast  to create and will last throughout the years.

IMG_6440

IMG_6442

Therm  O Web Products:

Medium Zots
PeelnStick Sheets

Additional Products used:

Chalk in  and Patterned paper – Quick Quotes
Flowers – Prima

Instructions:

To begin cut your patterned paper to fit all sides of the mailbox.

Adhere the paper with PeelnStick sheets, there is no drying time with these sheets.

After you’ve adhered all your patterned paper.

Ink the edges and start embellishing!!  Super easy and before you know it you have a pretty box for all your sweetheart’s keepsakes!!


Have you heard about our Therm O Web Valentine Sale?!

Valentine-sale

Your favorite Red and Pink products are on sale today through Valentine’s Day! Stock up on your favorite SpraynBond and HeatnBond products along with Pink Glitter Dust and more!

Click here to see all the products and do a bit of shopping!

Sweet Valentine Treats for Teachers

Since I’ve been wearing the Room Mom hat for over 5 years, we are always looking for new ways to show our appreciation!  This year, we are recycling some of the girls’ art boxes, and putting the card inside the box, and the gift cards right on top!

TOW.February12.EYamabe.jpeg7

Here’s the supplies we used:

TOW.February12.EYamabe.jpeg1

Therm O Web supplies:

Glitter Corners – Silver
Sticky Lines
Foam Squares
Glitter Dust – Pink
Mini Sticky Tape Runner
ICraft Adhesive sheets
ICraft Adhesive Tape – 1/4 inch
Zots – 3D

Other Supplies:

Heart Diecut – Sizzix
Distress Star Dust Dry Fine Glitter – Ranger
Patterned paper – Crate Paper
Doily – Joanns
Lace, Pearl Trim – Scrapbook Island
Flower – Prima

TOW.February12.EYamabe.jpeg8

To decorate the outside and top of the box, cut patterned paper to size of box.  Adhere with Sticky Lines around perimeter of the box.  Create paper bow, adhere with Mini Sticky Tape Runner and foam squares.  To create the glittered heart:  Adhere ICraft Adhesive sheet to cardboard.  Run through die cut machine [this is a Sizzix 4 heart die cut].  Peel off adhesive layer, sprinkle loose glitter and tap off.  Adhere heart to paper bow with 3D Zots.  Adhere bling with 1/2 3D zot.

TOW.February12.EYamabe.jpeg9

For the top of the box, spray doily with a light coat of Glitter Dust in pink.  I then layered and adhered the following with the Mini Sticky Strip runner: Doily to paper, heart to doily, and gift card holder to inside of heart.

TOW.February12.EYamabe.jpeg2

To create gift card holder, start with a 6 in by 6 in piece of paper.

TOW.February12.EYamabe.jpeg3

Fold in half on the diagonal.

TOW.February12.EYamabe.jpeg4

Score at the 2 7/8 inch mark, from both sides.

TOW.February12.EYamabe.jpeg5

Open up the paper, and fold new score marks over to meet in the middle.

TOW.February12.EYamabe.jpeg6

Fold in half, from the outside, so you create the pocket for the gift card.

TOW.February12.EYamabe.jpeg9

Slide gift card into the Glitter Corners, adhere to patterned paper.  And voila!

Erin Yamabe


Have you heard? We’re celebrating with a SUPER SWEET sale on our pink and red products! Head over to our website and do a bit of shopping today through Valentine’s Day! It’s a sale you won’t want to miss!

Valentine-sale

TOW-Feb-Logo-long

Deliver Valentines In Style with Therm O Web

We’re just one week away from the sweetest holiday…Valentine’s Day!

Today Designer Melissa Bullock with a little help from her girls shows how you can deliver those Valentine’s in style!

Doll Mailbox 2013-02-06 017r

This idea came from an American Girl magazine.  Once my girls saw it they had to make one.  We just created it with Therm O Web!  And of course we had to make little doll-sized envelopes.

Therm O Web Supplies:

Other Supplies:

  • Washi tape
  • Small mailbox
  • Candlestick between 5″ – 8″ tall
  • Ribbon
  • Cardstock

First cover the mailbox with strips of ribbon and washi tape.  Then out of iCraft Adhesive sheets, cut two large hearts for the mailbox end and 7 smaller hearts for the flag and mailbox body.  Peel off one layer of the iCraft backing, stick hearts to the mailbox.  ICraft Adhesive is so versatile it will stick to uneven textures, for example a seam between bulky ribbon and thin washi tape!  Peel off the remaining iCraft Adhesive backing and sprinkle iCraft hearts with glitter.  Use an old paintbrush to brush off excess glitter.  Finally, attach the mailbox to a candlestick with Jumbo Zots.

Doll Mailbox 2013-02-06 002r

Doll Mailbox 2013-02-06 003r

Doll Mailbox 2013-02-06 005r

Doll Mailbox 2013-02-06 013r

 

Have you heard? We’re celebrating with a SUPER SWEET sale on our pink and red products! Head over to our website and do a bit of shopping today through Valentine’s Day! It’s a sale you won’t want to miss!

Valentine-sale

TOW-Feb-Logo-long

Happy Hearts Are a Must with Therm O Web

Totally love you by Daniela Dobson

Totally Love You card by Daniela Dobson

Therm O Web supplies:

Therm O Web Sticky Dot Runner
Therm O Web Zots Small
Therm O Web Zots Medium
Therm O Web 3D White Foam Sticky Strips 1/2 in
Therm O Web Craft Zips

Other supplies:

Pebbles Inc. patterned paper
Crate Paper patterned paper
Prima lace
Technique Tuesday stamps
Clearsnap ink
Recollections journaling card
Button
White cardstock

Directions:

1. Create card base from white cardstock. Cut patterned paper slightly smaller than the card front and adhere to the card using Therm O Web Sticky Dot Runner.

Step 2 Daniela Dobson

2. Adhere a strip of Therm O Web Craft Zips to each edge of the journaling card and add lace.

Step 1 Daniela Dobson

3. Adhere Therm O Web 3D White Foam Sticky Strips 1/2 in to each side and adhere to the card front.

Step 3 Daniela Dobson

4. Cut hearts from patterned paper and adhere to the journaling card using Therm O Web Zots Small  and Therm O Web Zots Medium.

Step 4 Daniela Dobson

5. Stamp sentiment using red ink on white cardstock and adhere to the front.

Totally love you close  by Daniela Dobson


Valentine-promo

That’s right! We’re sweetening up February with a Valentine’s Day sale we know you’re going to love! Our favorite and your favorite PINK and RED products are on sale! Visit our website to see which products you can stock up and save on!

TOW-Feb-Logo-long

Love Comes in The Sweetest Packages

000_0007

For the love of a little sweet packaging today and the coming Valentine’s Day, bringing you a project today featuring some favorites (besides the goodies inside).  Nothing seems to go better together than some adhesive and paper, right?  Especially when using one of my favorites, Zots.  From attaching a button with a single zot or adding dimension with a 3D Zot, there is always a need.  This goodie box features a little of each.

000_0010

Just take a few of your favorite stamped, die cut or button layers, add a Zot or two and you have your perfect package!

Goodie Box by Andrea Budjack

Supplies:

Therm O Web Zots

We have a new Designer joining the team this month…talented Designer Amy Friend. Amy has this beautiful pillow on the Sizzix blog…do stop by and see it!

Grateful For You Holiday Gift Wrap

For the past week or so we’ve been highlighting our friends at Die Cuts With a View or as we like to say.. DCWV!

Today we take a different spin on their beautiful product and share some sweet gifts…perfectly times for the upcoming holiday or anytime you need something special for someone special!

Designer Andrea Budjack created these pretties…

project1 There seems to a reason each day to give someone special a little reminder that they are loved by YOU.

Today’s project does just that in just a few simple steps.

With your DCWV papers and Therm O Web adhesives, take a moment to wrap a treat in fun, colorful packaging.

Supplies:

Therm O Web SuperTape 1/4 inch
Therm O Web White Foam Squares

DCWV Papers
Twine
Pins
Cricut Expression Close To My Heart Cartridge

project2Instructions:

-Begin by cutting popper boxes from paper (used Cricut Expression, Close To My Heart cartridge).

-Assemble using Therm O Web Supertape along ends.

-Add ribbon, and stamped box wrap (using Supertape to adhere ends again).

-Add label embellishments to front of box using Therm O Web Foam Squares (white).

-Complete the front by die cutting heart, adding foam to the back side of heart and adhering it to the front of the box.

-Add twine and beaded stick pin.

Thanks for taking a peek… Andrea

t81_4d5cca326a4885557080b49a75fa2753

Be sure to visit our online store for all your Therm O Web favorite adhesive and a full selection of our HeatnBond products!