Back To School Cards with Deco Foil

Daniela Dobson Deco foil Back To School Cards

Back to school cards by Daniela Dobson Therm O Web Supplies: Therm O Web iCraft® Deco Foil™ Transfer Sheets Red Therm O Web iCraft® Deco Foil™ Transfer Sheets Gold Therm O Web iCraft® Deco Foil™ Transfer Adhesive 2.1OZ Therm O  Web iCraft® … Continue reading

Create an iCraft Watercolor Card

Are you familiar with our iCraft Adhesives?

Today Designer Erin Yamabe walks you through how to make your own unique card or even a canvas too with our iCraft Adhesive Sheets and Dots! Creating your own watercolor background is a snap with our iCraft adhesives!

ICraftcard.TOW.EYamabe.jpeg8

Supply list:

iCraft Adhesive Dots – 1.5 inch
iCraft Adhesive Sheets
Mini Sticky Tape Runner
Zots – Medium

Other Supplies:

Heidi Swapp Color Shine
Ruby Rock-it card base
Sizzix heart diecut
Bazzill rubon sentiment
Bazzill bling
American Craft & Ranger glitter

ICraftcard.TOW.EYamabe.jpeg1

Start by randomly adhering iCraft Adhesive dots to base of card.  Only remove backside of adhesive.

ICraftcard.TOW.EYamabe.jpeg2

Leave the top of adhesive in tact, to act as a mask.

ICraftcard.TOW.EYamabe.jpeg3

Spray your color shine liberally on card.  Wipe excess off.

ICraftcard.TOW.EYamabe.jpeg4

Remove top layer of adhesive from iCraft Adhesive dots.  Sprinkle with glitter.

ICraftcard.TOW.EYamabe.jpeg5

Adhere iCraft adhesive sheet to chipboard.  Run through favorite shaped die cut.

ICraftcard.TOW.EYamabe.jpeg6

Remove top layer of adhesive, and sprinkle glitter on.

ICraftcard.TOW.EYamabe.jpeg7

Adhere heart to card with mini sticky tape runner.

ICraftcard.TOW.EYamabe.jpeg9

Adhere sentiment and bling with Zots – medium size.

TOWCoffeeFlower6

Need some iCraft Adhesives for your next project? Shop right from the convenience of your computer through our online website! Pick up all your favorite iCraft products along with our Zots, HeatnBond and more!

Spring Crafting with Therm O Web iCraft Adhesive

Spring means fresh colors and celebrations!  

Getting an early start on Easter decorations is easy and fast  with iCraft sheets, there is no drying time which makes it convenient too!

Here is a project that took less than an 2 hours to complete.

IMG_6588

IMG_6587

Here’s what you will need to create this project.

Therm O Web Products:
Medium Zots
icraft Sheets

Other Supplies you will need
Patterned paper of choice
Stickles glitter glue
embellishments of choice
Oval Templates in 3 sizes
Wooden Egg
Acrylic paint

Directions:

Paint Wooden Egg

Trace shape onto patterned paper and cut out

Adhere with icraft sheets

Cut 3 different sized Ovals using 3 different patterned papers

Adhere each to egg as shown using icraft sheets

Adhere your photo using iCraft sheets

Embellish as desired

icraft Sheets

Thanks for stopping by the  Therm O Web Blog today!! Don’t forget you can pick up any of our iCraft products from our online store! Just click here to shop! 

Glitter Up Your Birthday with iCraft Adhesive

Happy birthday by Daniela Dobson Therm O Web iCraft Adhesive Sticky Strip runner

Happy Birthday Card by Daniela Dobson

Therm O Web Supplies:

Therm O Web Sticky Dot Runner
Therm O Web Zots Small
Therm O Web 3D Foam Squares
Therm O Web iCraft Adhesive Sheets

Other Supplies:

Samantha Walker patterned paper, stamps and dies
KI Memories pins
twine
ribbon
Clearsnap Ink
American Crafts glitter
3D paint

Directions:

1. Make card from cardstock.
2. Cut two strips of patterned paper, ink edges and adhere to the card front using  Therm O Web Sticky Dot Runner Tie ribbon across the seam.
3. Die cut banner from Therm O Web iCraft Adhesive Sheets. Peel off top layer and sprinkle with glitter.

Step 1 Daniela Dobson Therm O Web iCraft adhesive

4. Die cut second banner from patterned paper and stamp with coordinating stamp in black ink.

Step 2 Daniela Dobson Therm O Web iCraft adhesive

5.  Adhere both banners across the card using Therm O Web Zots Small  and Therm O Web 3D Foam Squares.

Step 4 Daniela Dobson Therm O Web 3D Foam Adhesive

6. Die cut a button from white cardstock and stamp with coordinating stamp. Tie to bow with jute. Stamp happy birthday on white cardstock, cut into a banner and adhere to the card using Therm O Web Sticky Dot Runner. Add pins to bow. Add 3D paint to banner and let dry.

Happy birthday close by Daniela Dobson Therm O Web Sticky Strip Runner

Let Pinterest Inspire You To Create

Looking for inspiration on Pinterest is a favorite pastime of so many.

Not only do you see some beautiful projects, clothing, great recipes etc., but you can really be inspired to create your own beautiful projects.

Here is a photo that inspired  to create a layout even though it’s a beautiful gown.

BoBunnyPinspirationJanuary2_zps30bbff46

The colors, the lace, the romantic feel all inspired to create this layout.

IMG_6161

Therm O Web Products:

3D Foam Squares
Medium Zots
Memory Tape Runner XL

Additional Products:

Bo Bunny Isabella Collection

Pinterest is a place to not only find lots of inspiration but to also “collect” and gather a board of pins for yourself. Perhaps home improvement ideas, tropical trips to dream about, the perfect cheesecake or maybe a quilt idea you’ve been wanting to try!TOW-Pinterest-Page

Give Pinterest a try and while there…be sure to follow our Therm O Web boards too!

Hop Along With our Spring Pillow Project

bunny close

This week is all about inspiration, and from one of our favorite places Pinterest.  Being that a pile of fabric strips were sitting at the end of the craft table, a quilted project seemed like a perfect way to go.  The search began and found a little inspiration though this photo.

9d9a474a79696662813b29af90ac8205(photo)

With strips of torn fabric, the basket weave effect came to be.  Once each strip was in place, using fusible fleece, the front woven panel was then ironed together and trimmed along each side.  The back panel of the pillow was then constructed from one solid piece of fabric and ironed on to fusible fleece as well.

000_0002

The bunny was cut from two piece of white fabric fused together using fusible web, light weight.  Found a bunny pattern on Pinterest here and cut out from fabric.  Added thread for the eye.  Used SpraynBond Fusible Adhesive Spray for the backside and ironed on to the pillow to keep in place as it was stitched to the pillow.  The pillow was then constructed, stuffed and completed with a stitched side and a pom-pom tail.

000_0005_00

Spring Bunny Pillow by Andrea Budjack

Supplies:
SprayNBond Fusible Adhesive Spray
HeatnBond Fusible Fleece
Fabrics
Pillow form or stuffing
Flower trims

Andrea


If you search Pinterest for altered composition books, there is tons of fabulous inspiration available. They make a nice, personalized and cheap gift!

rk tow nb6

Start with a plain composition book – many dollar stores carry them.

rk tow nb1

Using Therm O Web Super Stik, completely coat the cover of the book and the back side of patterned paper with adhesive. Coating the cover and the paper insures permanent sticking power.

rk tow nb2

Don’t cover the binding with patterned paper. Instead use some Therm O Web SuperTape Sheets and a wide ribbon or trim.

rk tow nb3

Cut strips of the Therm O Web SuperTape Sheets and completely cover the binding:

rk tow nb4

Peel off the red protective backing an apply ribbon and trim to fit. Once the cover and binding are done, decorate the cover with other embellishments. (Zots are perfect for adding buttons!)

rk tow nb 12

Next, to make tabbed pages, cover several pages with Therm O Web Memory Runner XL adhesive and cover with patterned paper here:

rk tow nb 9

and here:

rk tow nb 10

For a page with a seam, cover the seam with Sticky Lines:

rk tow nb5

and add a trim:

rk tow nb 11

And there you have it, a very inexpensive but super cute gift inspired by Pinterest!

Altered Composition Book by Rebecca Keppel

Supplies:

Sticky Lines
XL Tape Runner
Super Stik Glue Stick
Composition Book
Papers and Embellishments
🙂 Rebecca

Pinterest Inspiration-Cathedral Window Card

2 2013 Pinspiration CARD-Just a Note 1rev

“Just a Note” CARD by Patti Milazzo

Therm O Web Supplies:
Therm O Web Mini Runner – Sticky Tape
Therm O Web Zots – 3D

Other supplies:DCWV Cherry Limeade Paper Stack
Mambi Black/White Pattern Papers
Paper Smooches Sentiment Sampler Stamps
Black, White & Gray Cardstock
mini brads, flower punch

This beautifully quilted pillow was my PINspiration for the card above-

2 2013 Pinspiration- Cathedral Window Pillow

I really liked the cathedral window effect of this pillow and its striking color combination.  As you can see, I kept my note card much more simple and used layered and folded circles to get a similar effect without too much fuss.2 2013 Pinspiration CARD-Just a Note 2rev

1. Create a 5″x6″ card from cardstock and cut a 1″ wide strip to go across the front of the card.

2. Cut 9 circles from cardstock- 2″, 2.5″ and 3″: 2 gray and 1 black of each size.  Take 3 gray circles (each size) and mark the center points vertically and horizontally.  If available, use a grid ruled craft mat to find these points.  Then line up the marks and score to create a square within each circle.  Fold the edges of the circles as shown above.

3. Next, cut 3 pattern paper squares to fit inside each scored circle.  Use the Mini Tape Runner to adhere the circles inside.

4. Apply Mini Tape Runner Adhesive to the back of these scored circles and adhere them to the center of the other gray circles.

2 2013 Pinspiration CARD-Just a Note 3rev

5. Machine stitch around the layered circles so that the stitching just catches each folded corner.

6. Again use the Mini Tape Runner to adhere the black cardstock circles to the front of the card.  Then, apply 3D Zots to the back of each of the assembled gray circles and layer on top of the corresponding black circle.

7. Create a punched flower with brads and adhere this to the center of the medium circle also using 3D Zots.

2 2013 Pinspiration CARD-Just a Note 4rev

8. To complete the card, stamp a sentiment onto white cardstock, trim and apply more 3D Zots to the back to adhere just below the paper strip.

Pinterest

What have you been inspired by on Pinterest? Don’t forget….if you have clicked to follow us…please do!

Throw a Pinterest Party with Therm O Web

It’s true!

One can lose hours on hours of time simply by going to one place…no not the Doctors office or the DMV…..

Pinterest!

Pinterest is a virtual “bulletin” board of ideas…recipes, hairstyles, crafts, sewing projects, places to travel and more…much more!

Sometimes it’s easy to forget where we went in search of ideas before Pinterest came along. Today Designer Daniela Dobson shares her take on a Pinterest inspired project…

Fun in the sun by Daniela Dobson

Confetti Layout by Daniela Dobson

Therm O Web Supplies:

Therm O Web Zots Medium
Therm O Web 3D Foam Squares
Therm O Web Zots for Bling
Therm O Web Sticky Strip Runner
Therm O Web Super Stik Glue Stick

Other Supplies:

Pebbles Inc, Basic Grey, and Bo Bunny Press patterned paper
My Mind’s Eye stickers and chipboard
Pretty Little Studio journaling cards
Basic Grey banner and brad
Studio Calico mistable clouds
EK Success punch

There are so many fun things on Pinterest. This one really caught my eye. I love the stitching and the banners.

004_2010_024_0_172_0-1-400

Pinterest source and Original source

I used the banners on my layout except I used them horizontally and not vertically. I replaced the stitching with hand cut strips of patterned paper. The original banners are a part of an advent calendar and they have numbers. I punched confetti circles and scattered them randomly between the banners.

Fun in the sun close by Daniela Dobson

Directions:

1. Punch circle confetti from patterned paper and adhere them to the top half of the page using Therm O Web Zots for Bling.

Step 1 Daniela Dobson

2. Cut three thin strips from patterned paper and adhere to the top of the page using Therm O Web Super Stik Glue Stick.

Step 3 Daniela Dobson

3. Adhere large banners using Therm O Web Zots Medium.

Step 4 Daniela Dobson

4. Adhere all the patterned paper and the photos at the bottom of the page using Therm O Web Sticky Strip Runner.

Step 2 Daniela Dobson

5. Add Therm O Web 3D Foam Squares to some of the sticker strips.

Step 5 Daniela Dobson

6. Add stickers, banners and the clouds.

Fun in the sun close 2 by Daniela Dobson

Crafty Valentine Cupcake Garland

With the increasing popularity of all things cupcake, it’s no surprise that there is a huge variety of cupcake liners on the market. They are inexpensive and fun to collect, and not only work great for their original purpose, but are also fun to use in craft projects. Today Designer Alice Golden will be sharing an easy way to use iCraft adhesive dots and cupcake liners to create a Valentine themed window garland.

ValentineGarland1

To start, gather some cupcake liners in assorted sizes (alternatively, use one size and trim the edges with decorative scissors to create the various layers). ValentineGarland2 Slightly crumple the center of the liner to flatten. ValentineGarland3 ValentineGarland4 Use fishing line as the base of the garland and be sure to leave extra on either end. The garland is double-sided so that it will look good from any direction. Begin by creating a cupcake liner sandwich – place a liner face down and add an iCraft dot in the center. Run fishing line through the middle and top with another liner. ValentineGarland5 ValentineGarland6 The fun part is layering on additional embellishments. Add additional cupcake liners or die cut shapes, along with buttons, ribbon, and glitter. Use iCraft dots between the liners and Zots to attach heavier items.

ValentineGarland7

Die cut shapes from iCraft dots, add glitter, and use in the center of the medallions. Both the positive and negative images can be used. ValentineGarland8 Here the positive die cut is used on a cardstock circle… simply remove the protective liner from the front, ValentineGarland9 add glitter and brush off any excess.

ValentineGarland10

Here is what the negative image looks like applied directly to a liner.

ValentineGarland11

Try different size shapes and a variety of glitters. This one uses a small heart die and clear glitter.

ValentineGarland12

ValentineGarland13

The heart from the center of the die cut above was added to the top of a button and glittered then attached using Zots.

ValentineGarland14

Buttons not only look good, but they help add weight to the garland so that it hangs straight down.

ValentineGarland15

Once you get started with this, you won’t want to stop!

ValentineGarland16

Therm O Web Supplies:

iCraft dots in assorted sizes 1/2″
Zots Singles Craft

Other:

Cupcake liners
Decorative edged scissors
Heart die cuts
Buttons
Trim
Glitter

Thanks so much for joining us today!


Before you leave today we’d like to say a special hello to all the Sew Daily fans who’ve stopped by to visit us! We hope you’ll browse through our blog and see more of the projects we’ve shared! For visiting we’d like to offer a giveaway! Sewing-Prize-Pack It’s filled with your favorite HeatnBond products PeelnStick and much more! Simply post a comment…let us know what projects you’re currently working on or even your favorite HeatnBond product!

We’ll give you through Saturday to post a comment and then announce our winner next Monday! So be sure to stop by and see if it’s you! Valentine-sale Just a reminder…our Valentine Red and Pink Sale ends tomorrow so now is the perfect time to stop up on all your favorite products! Click here to see which ones you love are on sale! Don’t miss out!

Audrey Pillow

For details on Audrey’s Pillow as shown today on Sew Daily…click here and page down to the project!

Send Your Love in Style with Therm O Web!

February is the month of love and creating projects to celebrate this holiday!

We all need a keepsake box for those special Love Letters and Valentines.  This project is so easy and fast  to create and will last throughout the years.

IMG_6440

IMG_6442

Therm  O Web Products:

Medium Zots
PeelnStick Sheets

Additional Products used:

Chalk in  and Patterned paper – Quick Quotes
Flowers – Prima

Instructions:

To begin cut your patterned paper to fit all sides of the mailbox.

Adhere the paper with PeelnStick sheets, there is no drying time with these sheets.

After you’ve adhered all your patterned paper.

Ink the edges and start embellishing!!  Super easy and before you know it you have a pretty box for all your sweetheart’s keepsakes!!


Have you heard about our Therm O Web Valentine Sale?!

Valentine-sale

Your favorite Red and Pink products are on sale today through Valentine’s Day! Stock up on your favorite SpraynBond and HeatnBond products along with Pink Glitter Dust and more!

Click here to see all the products and do a bit of shopping!